PHILIPS Air Purifier 2 in 1 Humidifier and Air Purifier, Up to 60m2/645ft2, Auto Mode, Sleep Mode and App - AC2729/90

PHILIPS Air Purifier 2 in 1

Clean Air Delivery Rate (CADR) up to 250 m³/h: Purify rooms up to 65 m²

The main performance indicator of an air technology device is CADR (Clean Air Delivery Rate), that is, the flow of clean air generated in one hour. The higher the CADR value, the faster the cleaning process. The higher the pollution in the room, the higher the CADR value as well. The air purifier has a CADR of 250 m3/h and can purify an entire room of up to 65 m2.

HEPA filter captures 99.97% of particles as small as 0.003 microns

Thanks to a 3-stage filtration that includes a NanoProtect HEPA filter, activated carbon and a pre-filter, 99.97% of particles as small as 0.0003 microns can be captured to protect you from PM2.5, bacteria, pollen, dust, pet dander, gases and other pollutants.

Removes up to 99.9% of viruses and droplets in the air

Picking up droplets, including droplets that may contain viruses that infect the respiratory system. It has been separately tested by Airmid Health-Group to ensure that it removes 99.9% of viruses and droplets in the air.

NanoCloud Technology: Effortless Hydration

NanoCloud technology silently and effectively humidifies the air with up to 99% less bacteria. NanoCloud technology works through natural evaporation to create an invisible mist of pure water vapor particles in a very small size. Thanks to its small size, it moistens the air evenly and is very difficult for bacteria and metals to cling to, preventing the spread of bacteria and white dust in the room.

Auto humidification up to 500ml/h with 4 settings

Quickly humidify the air with a water humidification rate of up to 500ml/hour. The humidity level in the air is sensed and humidified automatically to the desired level. Set the target humidity level to 40%, 50%, 60% or 70%, and the humidifier will automatically turn on or off to reach the desired humidity level.

AeraSense technology senses and displays air quality

The AeraSense sensor scans air quality 1,000 times per second and displays the air quality in your home in a jiffy. The display digitally displays the level of allergens and PM2.5, as well as an intuitive color ring.

Rigorously tested for quality you can trust

Philips air purifiers go through 170 mandatory and rigorous detection tests before they are taken out of the factory. It also undergoes rigorous tests for durability and life, for 24/7 operation.

Sleep mode with very quiet operation

In sleep mode, the screen lights are dimmed, and the air purifier operates almost completely quietly while you sleep. Quiet Mark certification holder.

2-in-1 setup and air purifier only setup with auto and manual modes

Switch between 2-in-1 and air purifier modes with just the touch of a button. In automatic mode, the sensors intelligently choose the right speed for your home. Run the air purifier in either auto (general or allergens) or sleep modes or choose from 4 speed levels: 1, 2, 3 and maximum speed, for complete control of air flow and volume.

Tracking and Control by App

Monitor air quality and control your air purifier anytime, anywhere with the Clean Home+ app. Get alerts when air quality becomes unhealthy.

Low power consumption

Thanks to the air purifier's energy-efficient design, the device can run on a maximum power of 35 watts, which is equivalent to the power used by a standard bulb.